Adjustable Badminton Posts T-Base
An adjustable upright made from 40mmx2mm SHS slides over a 35mmx2mm SHS internal upright. A locking knob holds the adjustable slide at the nominated playing height. T-base is made from 50mmx6mm FMS and is gusseted to the main upright by 12mm RMS. A locking device under the T-base locks into a keyhole floorplate. Urethane pads on the T-base protect floors. Sold as a pair.
Freestanding Badminton Posts
Upright is secured by a diagonal brace fixed to a weighted base. Post is set at an international height, 1550mm. Net cord passes over a grooved cap and is fixed by a jamming cleat on the other side of the post. The cord on tie post is secured to a hook. Urethane pads protect floor from damage. Special non-marking wheels make this system portable.
International Badminton Posts (weighted)
Upright is fixed to weighted base by a diagonal brace (base does not protrude onto playing area). Post is set at 1550mm. The net cord passes over a grooved cap and is fixed by a jamming cleat on the other side of the post. The cord on the tie post is also fixed by a jamming cleat. Urethane pads protect floor from damage. Special non-marking wheels make this system portable.
Badminton Posts Adjustable
Same as BNT102T but fits floor sockets IS100, IS110, or IS120
Badminton Centre Post (sleeved)
Sleeved Centre post to fit IS100, IS110, or IS120 Floor Sleeves. Post has double fixed hooks with adjustable post heights.
Badminton Centre T Post
Similar to BNT102T but this post has hooks on both sides to support nets for two courts.