Basketball ring, net and bolts
B/Ball Backboard, Ring & Net (Interior)
Consists of backboard A16-111 and ring A16-1 for indoor use.
B/Ball Glass B/Board & FrameS/Down Ring & Net
Glass backboards are an alternative to timber backboards. Ideal for competition venues and especially where spectator area is behind the backboard. These are best incorporated at the design stage. Fixings can be provided to suit existing structure when upgrading to glass. Snap down ring A16-43 is bolted to 65x35mm RHS heavy duty bottom frame. Ring fixing is completely independent of the glass.
Basketball Ring, Net & Bolts - snapdown
Basketball Backboard Frame Padding
Shock absorbing foam pads the bottom and 300mm up the sides of the backboard. Supplied with adhesive for installation by customer.
B/Ball B/Board Wall Fixed: 0 - 1200mm
Used for training. Installed in a location clear of other courts and equipment. Frames of square steel tube fixed to the wall support the board. Diagonal bracing holds the structure rigid. Strong wall fixings required. Board: A16-111. Ring and net: A16-1. POA
B/Ball B/Board - Direct On WallWith Ring & Net
Used for training. Steel tube frame with lugs for attaching direct to wall or column. Board: Timber A16-111. Ring and net: A16-1. POA
B/Ball B/Board - International Mobile3250mm Overhang
International standard. Incorporates mini basketball height. Low profile base for minimum obstruction for spectators behind backboard. Backboard frame, underside of arms and the complete base are padded. As the backboard is raised, cams lower a wide front rubber covered foot to the floor. This takes the load of the backboard off the wheels to reduce movement during use. Rear anchor points and floor fixings are included. Backboard: glass, armour plated A16-45. Ring: snap down A16-43. Operation: Push button, electric 240volt hydraulic pump. Weight: 1200kg
B/Ball B/Board S/Swinging - SuspendedDouble Wall Bracket
Used where the distance behind the court to the wall is a maximum of 4000mm and when it is acceptable for the board to store against the wall. Wall frame, arms and board frame are a minimum of 38mm sq. steel tube. All hinge points have steel tube bearings. A telescopic brace holds board in playing position. Cables with 12mm turnbuckles are fixed to the wall or structure of building to support the weight of the board. Beams between columns may need to be provided by the customer. Board: Timber A16-111. Ring and net: A16-1. POA
B/Ball B/Board S/Swinging - SuspendedBottom Wall Bracket
Similar to A16-631. Used when the height of the wall fixings suits arms at 2900mm above the floor. The tops arms are angled up to support the top of the board. POA
B/Ball B/Board S/Swinging - SuspendedTop Wall Bracket
Similar to A16-631. Used when the height of the wall fixings suits arms at 3950mm above the floor. The bottom arms are angled down to support the bottom of the board. POA
B/Ball B/Board S/Swinging - SuspendedVariable Wall Bracket
Similar to A16-631. Used when the arms to support the top and bottom of board are angled to suit the height of the walll fixings. POA
B/Ball B/Board - Mobile 2300mm O/Hang
Incorporates mini basketball height. Padded base and backboard frame. Floor anchors included. Backboard: glass, armour plated A16-45. Ring: Snap down A16-43. Operation: Manual hydraulic pump. Base: width - 1300mm length - 1650mm. Distance from court to wall: 4250mm min. Stored size: width - 1860mm length - 3050mm height - 2100mm. Weight: 800kg approx.
B/Ball B/Board- Mobile Light 1800mm O/H
Adjustable for mini basketball. Front of base is padded. Floor anchors included. Backboard: timber A16-111. Ring: A16-1. Operation: manual hydraulic pump. Base: width - 1200mm length - 1200mm. Distance from court to wall: 3000mm min. Stored size: width - 1800mm length - 2700mm height - 1800mm. Weight: 400kg approx.
B/Ball B/Board - Side Swing Cantilevered
Similar to A16-631. Used where there is no available fixings for support cables or where the arm length is less than 2500mm and the wall fixings are strong enough to take the loads. Diagonal braces between side arms to support the board. Beams between columns may need to be provided by the customer. POA
B/Ball B/Board, Ring & Net (Exterior)
Consists of backboard A16-112 and ring A16-1 for outdoor use.
Mini B/Ball Height Adj. Frame, Gas Strut
For junior basketballers. The system can be added to any Acromat backboard and is best incorporated at the design stage. Consists of two interlocking frames. One is fixed to the backboard support structure and one to the backboard. A latch system and gas struts allow the board to be lowered to mini basketball height. Operated from the floor with handle provided. Ring height adjustment: 3050-2600mm from floor.