A16-100
Volleyball Net With Rope
For recreational and primary school use with games posts A16-57, 58 and A16-300. Size: 9500mm long x 1000mm drop.
A16-101
Volleyball Conversion - A16-62 To A16-61
Fits A16-62 volleyball posts. Allows the bottom of the net A16-92 to be tensioned with a winch.
A16-311
V/Ball Net Tensioner With Clamping Sys.For Beach Volleyball
Hot dipped galvanised fittings with pulley and linear tensioner A16-570. Normally clamp to timber posts 125x125mm. Clamping system allows net height adjustment for different competitions and changes in beach sand level. Order net A16-93 separately. Posts to be provided by the builder/customer.
A16-330
V/Ball Linear Tensioner - Conversion Kit
Replaces ratchet winch on earlier model volleyball posts A16-62. The handle is operated for tensioning and releasing the load.
A16-432
Moulded Volleyball Post Padding
Pad 2200mm high, high density moulded foam 15mm thick. Pad is held in place by touch tape straps. Single Pad.
A16-59
Volleyball Post-Cntr-with Linear Tension
Where there is limited space between courts, this double-sided centre post can have a net fitted to each side. Similar to posts A16-62.
A16-61
Volleyball Posts with 2 Tensioners
For competition, schools and club use. International standard. Post consists of 75x50mm steel section with 65x35mm telescoping inner section for height adjustment. Spring-loaded pin sets the height. Linear tensioner A16-570 tensions the top of the net. The handle must be operated for both tensioning and releasing the load. A winch and pulley A16-101 tensions the bottom of the net. Base of post is pipe to fit sockets A6-9, 11, 13 and 50. Heights at centre of net: 2430, 2350, 2240, 2150, 2100, 2505 and 2000mm above floor.
A16-62
Volleyball Posts With Linear TensionerFor Socket (64mm) ID
Similar to A16-61 but with one tensioner A16-570 for the top of the net.
A16-63
Volleyball Posts With Linear TensionerFor Anchors
Used where floor sockets cannot be installed. Similar to A16-62 but with a 'T' shaped base and floor anchors selected to suit type of floor. Wheels fitted to base for easy handling. When ordering, please advise type of floor.
A16-64
V/Ball Posts - Inter. For Socket 79mm ID
For international competition. Similar to A16-61, stronger, heavier steel sections. Suits sockets A6-20, 69 and 71.
A16-65
V/Ball Posts- w/Linear Tensioner, CentreFor Anchors
Used where floor sockets cannot be installed. Where there is limited space between courts, this double-sided centre post can have a net fitted to each side. Used with posts A16-63. Minimum space between courts 1400mm.
A16-91
Volleyball Umpires Stand International
International standard. Plywood platform, 610x665x19mm, adjustable in height from 730mm to 1330mm is supported by a 20NB pipe frame. Wheels are fixed to frame for easy handling.
A16-92
V/Ball International Net (No Antennae)
Standard 100mm square mesh 2mmD polypropylene, with fibreglass batten at each end and lacing cord. Suits posts, A16-61 and A16-64. Order antennae and side band A16-94 separately. Size: 9500mm long x 1000mm drop. Includes chain attachment.
A16-93
Volleyball Practice Net - Cable 12250mm
Suits posts A16-62 and A16-63. Standard 100mm square mesh, 2mmD polypropylene. Size: 9500mm long x 1000mm drop. Post spacing - 11000mm.
010626.verity not found