181473

Backboard 1800 x 1050 x 18mm

Marine bonded exterior grade ply. For indoor or outdoor use. Warning Improper installation or swinging on the ring may cause serious injury or death.

184998

Stadia Basketball Backboard Padding

689394

Spalding Hercules Basketball System 50"

Portable systems can be moved for convenience or storage. Spaldings Screw Jack Elevator System allows you to adjust the basket to the exact height you desire. Board Composition: Acrylic. Board Size: 50" - 127cm. Lift Type: Exacta Height. Base: Mobile, fills with sand or water, 140 litrecapacity. Height Adjustment 7.5 - 10/2.3m - 3.05m

689396

Spalding Gametime Basketball System 44"

Portable systems can be movedfor convenience or storage. Adjustment in 5 levels of 15cm. Non-tilting adjustment. Board Composition: Polycarbonate. Board Size: 44" - 112cm. Lift Type: Pro-Glide. Base: Mobile, fills with sand or water, 121 litrecapacity. Height Adjustment: 7.5 - 10/2.3m - 3.05m

A16-4

B/Ball Glass B/Board & Frame
S/Down Ring & Net

Glass backboards are an alternative to timber backboards. Ideal for competition venues and especially where spectator area is behind the backboard. These are best incorporated at the design stage. Fixings can be provided to suit existing structure when upgrading to glass. Snap down ring A16-43 is bolted to 65x35mm RHS heavy duty bottom frame. Ring fixing is completely independent of the glass.

A16-53

B/Ball B/Board - Direct On Wall
With Ring & Net

Used for training. Steel tube frame with lugs for attaching direct to wall or column. Board: Timber A16-111. Ring and net: A16-1. POA

A16-633

B/Ball B/Board S/Swinging - Suspended
Top Wall Bracket

Similar to A16-631. Used when the height of the wall fixings suits arms at 3950mm above the floor. The bottom arms are angled down to support the bottom of the board. POA

A16-78

B/Ball B/Board - Mobile 2300mm O/Hang

Incorporates mini basketball height. Padded base and backboard frame. Floor anchors included. Backboard: glass, armour plated A16-45. Ring: Snap down A16-43. Operation: Manual hydraulic pump. Base: width - 1300mm length - 1650mm. Distance from court to wall: 4250mm min. Stored size: width - 1860mm length - 3050mm height - 2100mm. Weight: 800kg approx.

A16-8

B/Ball B/Board - Side Swing Cantilevered

Similar to A16-631. Used where there is no available fixings for support cables or where the arm length is less than 2500mm and the wall fixings are strong enough to take the loads. Diagonal braces between side arms to support the board. Beams between columns may need to be provided by the customer. POA

BB840

Basketball Backboard F/Size Plywood

Official size 1800x1050x19mm. Backboard is manufactured from durable formboard and is all-weather plastic-coated with four coats of Taubmans industrial satin finish oil-based paint. All outside borders and ring lines are marked to official measurements. These backboards are extremely strong and should give years of use with minimal maintenance. Ideal for both outdoor and indoor applications. Boards are supplied undrilled unless ordered with a basketball system.

BB844

Basketball Backboard Fibreglass

Very heavy-duty, fully reinforced with marine plywood and steel bracing glassed into the back of the board for extra rigidity. 1800x1050mm. Will outlast timber backboards. Ideal for schools and clubs.

BB847

SMC Basketball Backboard
1800mm x 1050mm

Sheet molding compound (SMC) is fibreglass mix that is incredibly durable. It is comprised of several materials including fibreglass, polymer resin, release agents and thickeners. The major advantages of SMC basketball backboards is that they are much stronger and more durable than timber alternatives, will withstand years of wear and tear, will not corrode over time, have increased water and UV resistance, have very high fire retardancy. SMC backboards are expected to last up to 10 years (depending on the environment). Size is 1800 x 1050mm.