Uneven Bars - Fibreglass Rails Olympic
Rails A9-113 fibreglass, are fixed to the uprights with bolts. Height and width of rails are adjustable without changing cables. Adjust height by releasing load on tension indicator A9-119 fitted to cables and releasing spring-loaded pins. Width adjustment is controlled by Acromat patented slide system between rails. This incorporates a measure device. Steel bases with transport wheels have support pivots for chromed tubular uprights. Plastic coated cables connect to top of outer uprights. Floor plates must be ordered separately.
Uneven Bars - Fibreglass Rails
Same as A9-120 but cable system has webbing cable tensioners and rails A9-13 are removable.
Uneven Bars - Fibreglass Rails WallHinged
Same height and width adjusting system as A9-121 but with one side hinged from a wall. Wall bracket supplied for storage against the wall. Ideal system to save space. Set up can be completed quickly and easily with one person. Floor plates A6-1 are included.
Uneven Bars - Superwood Rails
Same as A9-121 but superwood rails A9-54.
Uneven Bars - Superwood Rails WallHinged
Similar to A9-123 but with superwood rails.
Uneven Bar - Rail Fibreglass Fixed
Replacement rail. Fibreglass section with thin timber veneer bonded to the surface. Fabricated steel end fittings with hole, are riveted to the fibreglass. Length: 2400mm. Size: 40mmD.
Uneven Bar - Rail Fibreglass Removeable
Replacement removeable fibreglass rail. Similar to A9-113 but end fittings with pin to suit A9-121.
Uneven Bar - Rail Round Superwood
Replacement rail. Conforms to F.I.G. dimensions. Thin European Beech veneers are laminated under extreme heat and pressure to produce superwood. Safety galvanised steel cable inserted into the timber rail fitted with steel end fittings.
Uneven Bar - Wall Hinge Conversion
Used to convert free-standing uneven bars to wall hinged.
Uneven Bar - Replacement Width Adjuster
Width adjustments to F.I.G. dimensions.
Uneven Bar - Tensioner/Indicator
Unique Acromat system. Increase or decrease tension on the cables by rotating the handle. Scale indicates the load on the cable. WARNING - not to be used with cable and pulley systems made before January 2001.
Uneven Bar - Tensioner/IndicatorConversion
Includes the complete set of two tensioner/indicators A9-119 and four cables, pulleys and chains. Used to upgrade existing uneven bar system to include the tensioner/indicator.
Uneven Bar - Cable Padding (Set of 4)
Carpeted padding wraps around the cables. Touch tape fastening.
Uneven Bar - Cable, Pulley and Chain
Four required for A9-121. Plastic coated cable.
Uneven Bar - Rail Pad
High density foam with vinyl cover and touch tape joining. Size: 90mmOD x 50mmID x 400mm long.
Uneven Bar - Cable Tightener
Slide tensioner made from heavy webbing.
Parallel Bars - Olympic FIG FibreglassFixed
Similar to A9-86, but with heavier, wider base.
Parallel Bars - Olympic FIG Fibreglass
Rails A9-11, fibreglass with timber veneer for improved grip. Acromat cam operated lever clamps uprights to allow width and height adjustment. Uprights are powder coated heavyweight pipe, inner uprights are chromed 35mmD solid steel with offset at top for adjustment. Base made from 80x40mm RHS is splayed and weighted for stability. Base has keyholes for transporters A9-9. Rubber feet X6-14 protects the floor. Width adjustment: 410-660mm. Height adjustment: 1520-2150mm from floor, 50mm increments. Rail length: 3500mm.
Parallel Bars - Olympic FIG Superwood
Same as A9-86 but with superwood rails A9-15.
Parallel Bars - Jnr Olympic FIG Oak
For school and recreation use. Rails A9-14 are oak with steel core. Height and width adjustment system is the same as A9-86 but with lighter base and uprights. Width adjustment: 365-615mm. Height adjustment: 1120-1800mm from floor. Rail length: 3500mm.
Parallel Bars - Club Model SuperwoodRails
Designed for recreation and gymfun use. Rails, A9-18 are superwood. RHS base and square uprights with height adjustment pin X4-40 and rubber knob X6-1 screw clamping. Rubber feet X6-14 protect the floor. Width adjustment: 405-660mm. Height adjustment: 940-1750mm from floor, 100mm increments. Rail length: 2750mm.
Parallel Bars - Low Balancing Oak
Ideal for balance training. Steel base with pivoting uprights for width adjustment and storage. Oak Rails A9-19. Height: 400mm. Length: 1800mm.
Parallel Bars - Gym Fun (Folding)
Designed for kindergym and primary school activities. Bars are 34mmD for easy grip for small children. Steel base with pivoting uprights for width adjustment and storage. Width: 500mm maximum. Height: 750mm. Length: 1800mm.
Paralettes - Oak
For hand balancing practice. Size: 35mmD.
Parallel Bar - Rail Fibreglass (AAI)
Replacement rail conforms to F.I.G. dimensions and specifications. Fibreglass core with timber veneer. Length: 3500mm. Size: 51x41mm.
Parallel Bar - Rail Superwood
Conforms to F.I.G. dimensions and specifications. Beech veneers glued under extreme pressure and temperature. Length: 3500mm. Size: 51x41mm.
Parallel Bar - Rail Superwood (ClubModel)
Replacement rail. Elliptical shape made from superwood. Length: 2750mm. Size: 48x41mm.
Parallel Bar - Rail Oak (Low Balancing)
Replacement rail for A9-8. Australian Oak timber Length: 1800mm. Size: 45mm D.
Parallel Bar - Fill In Mat
Carpeted covered Acrolite foam 80mm. Fills in base area of paralleled bars and covers RHS base. Fits: A9-64, 85, 86. Size: 34440x670x80mm.
Parallel Bar - Rail Pad
High density foam with vinyl cover and touch tape joining. Size: 90mmOD x 50mmID x 900mm long.
Parallel Bar - Upright Pad
High density foam with vinyl cover and touch tape joining. Size: 90mmOD x 75mmID x 900mm long.
Parallel Bar - Transporter
Steel frame with safety catch, fits onto parallel bar base. Rubber wheels 160mmD. Fits: A9-115, 84, 85, 86.
Parallel Bar - Rubber Foot
Replacement non-marking rubber foot. Size: 80x40mm.
3913.verity not found