Gilbert Helix Portable Netball Stand
Portable netball stand adjustable from 2.44 metres to 3.05 metres. Base measures 50.5cm x 49.5cm x 12.5cm and can be filled with water or sand for stability. Sold as a single unit.
Gilbert Elite Portable Netball Stand
Portable netball stand that measures to full ring height of 3.05 metres. Base measures 75cm x 53cm x 13.5cm and can be filled with water or sand for stability. Comes with heavy duty wheels to assist with moving unit when full. Sold as a single unit.
Portable Netball Stands
Heavy duty stands, uprights made from galvanised steel tube with zinc plated regulation netball ring attached by weld. Bases are made from 12mm flat steel in triangular shape. Depending on surface that goals are being used on we recommend use of either zinc plated peg product code 343296 or sandbag product code 525510 to secure base. Sold as a pair.
Portable Netball Stands with Wheels
Same as 525539 but with two wheels attached to back of base for easy transportation.
Portable Netball & Volleyball Stands
Heavy duty stands, uprights made from galvanised steel tube with zinc plated regulation netball ring attached by weld. Bases are made from 12mm flat steel in triangular shape. Comes with lugs for volleyball. Depending on surface that goals are being used on we recommend either zinc plated peg product code 343296 or sandbag product code 525510 to secure base. Sold as a pair.
Sandbag 800mm x 200mm
Sandbag for placing on weighted base of netball and volleyball post systems. PVC bag 800mm x 200mm with touch tape fasteners. Weight approximately 12kgs when filled with sand. Sand not included.
Portable T Base Netball PostsFixed height with Plate & Net
T-shaped RHS steel base with rubber feet and two wheels for easy manoeuvrability. 60mm OD round steel posts with 16mm competition rings and nets. Threaded floor plates FP110 and 1/2 inch lock down bolts LDB100 included. Rings are preset at 3050mm above floor level.
Portable T Base Netball Posts -Adjustable
As detailed for NB307 but height is adjustable from 2400mm to 3050mm. Floor plates included.
Netball Post, Net & Floor Plate (3050mm)
Used where sockets cannot be installed. Steel pipe supported by a T-shaped RHS steel base with rubber feet X6-13 and transport wheels. Holding down knob X6-39 and threaded floor plate A6-6 are included. Ring is as detailed for A16-75. Ring height: 3050mm above floor.
Netball Post, Net & Floor Plate (Adj.)
Used where sockets cannot be installed. Similar to A16-10 but adjustable height. Ring height: 3050mm and 2440mm above floor.
Netball Posts and Sleeves(with locking lug)
Netball posts with sleeves, made from galvanised steel tube with zinc plated ring. Includes sleeves suitable for setting into ground as required. Post upright has locating lug that fits into recess on sleeve to keep post aligned. Sold as a pair.
Netball Posts - Locking Lug (post only)no sleeves
Post only, no sleeves.
Netball Sleeve Cap
Fits over top of sleeve when not in use. Fits product 525578.
Galvanised steel tube netball post sleeves. Each sleeve is 470mm long and made from 50NB steel to suit post from 40NB steel. To be set into concrete to accommodate posts. Priced individually.
Netball Sleeve Cap - suit WOS sleeve
Zinc plated sleeve cap suits standard netball sleeve made from 50NB steel. See product code 525599.
Spalding Basketball and Netball System
Dual basketball and netball system with fillable bases. Base capacity 140 litres. 48" polycarbonate backboard, with heavy duty slam jam ring. Adjustable from 2.3m to 3.05m. Assembly required.
Netball Post - Adjustable Height
Adjusts for junior competition. Similar to A16-75 but upper section of post telescopes. Ring is as detailed for A16-75. Ring height: 3050mm and 2440mm above floor.
Netball Post & Net (Galvanised)
Competition standard. Steel pipe 60mmD upright with ring and net. locating pin prevents rotation. Suits socket A6-30. Hot dip galvanised finish for outdoor use. Ring is as detailed for A16-75.
Netball Post & Net - 3050mm High
Competition standard. Steel tube 63.5mmD upright with ring and net. Suits socket A6-9, 11, 13 and 50. Locating pin prevents rotation. Ring: 380mmID x 16mmD high tensile solid steel with 12 rams horn hooks to attach net. Ring height: 3050mm above floor.
Access Cover Plate
Internal cap 129mm, access hole 120mm. Outer plate 145mm OD. Cap is recessed on one side to take flooring material. For access to game sleeves under floor.
Access Cover Plate & Sleeve Combo
Complete access cover plate and sleeve.
Access Cover Plate/Sleeve Combo Netball
Heavy Duty Netball Posts
75mm SHS powder-coated galvanised posts with NB414 20mm double-strutted rings. Includes sleeves.
Heavy Duty Netball Posts - 90mm
90mm galvanised posts, powder-coated white, with NB420 heavy-duty 20mm double-strutted rings. Pinned at the bottom with locking pin at the top. Complete with 115mm ground sleeves and caps.
Aluminium Netball Post
Netball post 60mm OD. Aluminium, fixed height. 16mm competition ring, locking pin on base, powdercoated regulation white. Pole weighs 8kg. Sold individually. Suits indoor sleeve IS120L (sleeves extra)
Netball Post - Floor Socket
Single 60mm OD pipe complete with 16mm competition ring and net ties. Locking pin at base of posts prevents post rotating. Ring height is set at 3050mm above timber floor. Suits indoor sleeves IS120L (sleeves extra).
Netball Post Adjustable - Floor Socket
As detailed for NB309 but height is adjustable from 2400mm to 3050mm. Suits indoor concrete floor sleeves IS115L and timber floor sleeves IS120L and AC100 access cover plates (sleeves and plates extra).
Indoor Netball Posts - Concrete Floor
Single 60mm OD pipe complete with 16mm competition rings and net ties. Locking pin at base of posts prevents posts rotating. Ring height is set at 3050mm above floor. Suits indoor concrete floor sleeves IS115L (sleeves extra).
5255.verity not found